Showing posts with label raleigh twenty. Show all posts
Showing posts with label raleigh twenty. Show all posts

Tuesday, 5 July 2011

Stowaway Build





Here is all the various parts of my Stowaway laid out and ready to be built up. The freshly stripped frame had recieved several coatings of black Hammerite, which when sprayed on is really nice stuff. I started with a thickly brushed on undercoating then after a light sanding sprayed over the top.

I had planned to retain the original handlebar stem but once the bike was together and test-rideable it was obvious that for the trekking bars to work the bike needed a much longer reach stem.So I got a long reach adjustable stem off ebay for £15.


The Stowaway handlebar stem is a bit unsual because it doesn't have a normal headset. Instead there is a plastic bush at the top and a piece of looped wire which slides inside the stem. This bit of wire secures through the bolt for the from caliper brake. This means that when you are adjusting the quick release stem you can't accidentaly pull the stem out too far.




The finished wheels with tyres fitted. These Kenda tyres seemed like a good good choice (there isn't much choice with 451 tyres) but when it came to fitting them they have a ridiculously tight bead - not good news for any on the road punctures.


As with alot of vintage bike building the cotter pins for the cottered cranks where a bit worse for where. These things suffer on old bikes, mainly because they have old imperial threads and over the years someone will always have tried jamming on a metric nut. So both cotters got retreaded with metric threads and given brand new locking nuts.


mmmm shiny crisp new threads.

Here's a little video to show how easy it is.


During the build I stupidly managed to break the shifter for the Sach 5 speed hub by overtightening the nut. Its not a great design to be honest , since it relies on the plastic to take all the strain on the metal clip being wedged inside of it.

After deciding that there was no way to fix the original method of fixing I started to work out an alternative. So I took an old shimano friction shifter. Took out the handlebar attachment from that. chop some bits off it. Drilled a hole directly through the top of the sach shifter and glued/bolted the shimano base onto the sachs body.


The end result is slightly less elegant than before, but is actually more ergonomic as the whole shifter now sits a bit higher above the grips, meaning its easier to shifter with my thumb than it was before.

You can get long foam grips specially for butterfly bars, but I'm not keen on squishy foam, so instead got some honeycomb effect fake leather tape. Brown because the plan it to get a Brooks saddle of somesort, or a Charge Spoon at some point. With this build I used a gusset 1/2 link chain. I've never used a 1/2 linker before, but knowing how much bother it has been sometimes trying to get the chain tension just right on a hubbed bike (and then resorting to using a 1/2 link piece anyway) I decided this time it was worth trying. I'm a convert, 1/2 linkers are really easy to split & fit.
The rack is the original style Stowaway rack, but was a 24" wheel version new old stock. I had planned to just cut the stays down to 20" (so that the deck lays horizontal) but decided the extra heel clearance from it being slightly angled might be more useful.the front X-FD drum is as superb as expected, but the original cleaned up rear caliper is about as much use a chocolate firegaurd. I'll try it with some modern pads and see if i can get it any better.

The finished bike is very light and agile - as Stowaways usually as, but with the added fun of drum brakes, extra hand positions

Wednesday, 23 February 2011

Triumph Trafficmaster (Twenty Stowaway)

Back in October I got a couple of Raleigh Stowaways Triumph Trafficmasters. Neither were complete, but together they would make a single complete bike and another that could be stripped down and rebuilt in a new form. The seller I got them from has posted on the Raleigh Twenty forum in the past and has what can only be described as the greatest collection of folding bikes on the entire planet (or at least in England). 

These bikes are alot of fun to ride. They're fast and manouverable but still comfortable (apart from those crap saddles). The main difference in feel is probably the wheelbase. It's a few centimeters short of the wheelbase on a large wheeled bike which makes a difference for the cruising stability - or Longitudinal stability which in a nutshell probably means something like 'Does it go around corners?' & 'how easy is it to hold a straight line?'.

Oh yes and in typical Raliegh 3 speed fashion the gearing is too high, but really its based on the notion that if you need a lower gear to get up that hill then you should get off and push because then the gearing will be right for going fast down the otherside.
Both frames are a little scratched, but one of them is a bit more rusty than the other. So the least rusty bike got to live and recieved the missing bits it needed off the other bike, whilst the other poor bike found out that it could be reduced to the contents of a cardboard box ready for rebuilding. The plan so far is a hub geared/hub braked collapsible tourer with (if I can get some cheap) a set of butterfly bars.
Surviving original bike got to play out in the sun

Poor rusty bike didn't even fit in his temparary cardboard home
While we're at it here's a romatic shot of my brothers genuine Raleigh Stowaway with all of it's ever so slightly better features than mine, such as chromed mudgaurds and sheathed brake levers....oh and a mickey mouse bell.







Monday, 16 August 2010

Hopper Pt 2

Here's a few more photos of the Hopper being stripped. 

Scrape away some of the very thick grime to find the bike is much older than I was expecting.


Bottom bracket is nice and free running. The cotter on this crank came out easily, but was very seized on the drive side. Nothing a bit of liberal WD40 and mallet application won't solve though.

Here's the cranks after a bit of WD40 and a wire brush. Nice and shiny and ready to go back onto the bike when the time comes.

A sticker on the seatpost proudly tells me the frame is made from Pheonix 101 cycle tube. It'll be a shame to lose this sticker and the Elswick logo, I like them. If I can I'll try to mask over them and keep them as part of the new paint.


The mucky pedals cleaned up reasonably well whereas the grips are more 'cream' than white.
Some shots to show the chunky lugwork.
And finally the bare frame on its own.

Saturday, 14 August 2010

Elswick Hopper Cosmopolitan (Pt 1)

In a fit of fleabay madness I seem to have bought a rusty old ladies unisex shopper bike. So let me present Elswick Hopper’s answer to the Raleigh twenty.

It’s basically the same principle as a Twenty but with a slightly more elaborate double tube frame and nifty one piece bent tubes forming the chain and seat stays.

That’s about all I know about this bike. There doesn’t seem to be any mention of the Cosmopolitan on the internet at all, just a few brief historys etc about Elswick hopper itself such as on Sheldon and an article from 1949 which has some fantastic black and white photos.

This particular one is a complete rust-bucket and it’s a good job I have no intention of restoring it to the condition of the one show below that sold on ebay in Coventry because so many of its original components are bin-fodder.


Laughably the seller described the brakes as 'great', even though the rear caliper had no cable or brake blocks and the front was so rusted that the pivot was seized. All that was stripped and binned within 5 mins. Good job it was cheap and I didnt want the brakes anyway, no harm done but cheeky to describe something so inaccurately.

The handlebars and stem went straight in the bin as the stem bolt sheared immediately, leaving me to cut the stem with a hacksaw and hammer the rest of the bolt & quill out. The chrome plating on the front rack is rusted to hell, so that may get painted up and reused in someway, or just put on ebay along with the white pedals and grips.

It came with 20” 451 wheels, but I’ll replace those with bmx sized 20” 406 wheels instead and use drum brakes. The 3 Speed AW Sturmey Archer is stamped August 73 and it’s in pretty fantastic condition considering it's age and how knackered some of the other components are. I’ll be stripping the AW down completely and cleaning it up. Then it can either go onto ebay to recoup the cost of the bike or I’ll keep it for the future.

The frame will get a new coat of paint and I’ll be keeping the chain guard. The mudguards I’m not sure about, as the rear one is badly split and they wont be quite the right size for the smaller wheels anyway.

It will take a while to build up the various parts needed to make a working bike out of this, so this one is a long term project for rainy days.